Details
CANON CR-X500
Equipped with a large 1-inch sensor and 15x zoom lens, Canon’s newest CR-X500 PTZ (Pan, Tilt, Zoom) camera is built with 4K outdoor broadcast in mind. Featuring water and dustproof housing, IP integration as well as other robotic control functions, the CR-X500 is engineered to fulfil the needs of outdoor broadcasting, surveillance and installation work.
- 4K 50/60P output with 1 inch CMOS sensor
- 15x Canon Zoom lens + 30x FHD Advanced Zoom
- IP55 rated PTZ Housing and IP Integration
|
Operating Condition
|
Outdoor |
| Image Sensor | Type 1.0 (1.0 in.) single-plate CMOS sensor |
| Total pixels: approx. 13.40 megapixels | |
| Effective pixels: approx. 8.29 megapixels (3840 x 2160) | |
| Lens | f=8.3 – 124.5 mm, F/2.8 – 4.5, 9-bladed iris diaphragm |
| 35mm equivalent focal length: approx. 25.5 - 382.5 mm | |
| Zoom | Optical: 15x |
| Advanced (FHD): 30x | |
| Minimum Focusing Distance | - |
| Angle Of View | Horizontal: 73.0 (W) – 5.7° (T) |
| Vertical: 45.2° (W) – 3.2° (T) | |
| Shutter Speed | 1/3 – 1/2000 sec. |
| (specific values depend on the frame frequency and frame rate) | |
| Iris | Manual/Automatic aperture |
| Gain | -6.0 – 33.0 dB |
| ND Filter | Built-in (Off, 1/4, 1/16, 1/64), motor operated |
| White Balance | AUTO, Set A, Set B, Daylight, Tungsten, Kelvin |
| Focus | Dual Pixel CMOS AF |
| Gamma | Normal 1 (Standard), Normal 1 (BT.2020), Wide DR (BT.709), Wide DR (BT.2020), Canon Log3 (BT.709), Canon Log3 (BT.2020) |
| Image Stabilizer | Optical-shift |
| Min. Subject Illumination | Approx. 3 lux (shutter speed 1/60 sec., Frame Rate 59.94P, Gain 33.0 dB) |
| Pan, Tilt, Zoom Operation | Pan Range: Horizontal ±170° |
| Pan Speed: 0.5° – 25°/sec. | |
| Tilt Range: Vertical -50° – +30° | |
| Tilt Speed: 0.3° – 20°/sec. | |
| Infrared Shooting | - |
|
Video Output Format
|
|
|
SDI
|
12G-SDI |
| 3840 x 2160: 59.94P (4:2:2 10 bit) | |
| 1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, | |
| 29.97P/23.98P (4:2:2 10 bit) | |
| HDMI | - |
| IP | - |
| USB | - |
| Supported Protocols | NU Protocol/U-4 |
| Preset | - |
|
Interface
|
|
|
Communication Control
|
- |
| Network Terminal | - |
| SDI Out Terminal | 12G-SDI, BNC jack (output only) x 1 |
| Time Code Terminal | - |
| Gen-Lock Terminal | BNC1 system (tri-value/BB) |
| HDMI Out Terminal | - |
| RS-422 Terminal | - |
| Mic Terminal | - |
| Input 1 / Input 2 Terminals | - |
| External Device I/O Terminal | AUX connector x 1 |
| USB Terminal | - |
|
Others
|
|
|
Operating/Storage Environment
|
-15°C – +40°C (+5°F – +104°F), Humidity 90% or less (without condensation) |
| (Startup temperature -10°C – +40°C (+14°F – +104°F) | |
| Power Supply | - |
| Power Consumption | DC 10.5 - 15 V, 90W |
| Quietness | NC55 or lower |
| Dimensions (W X H X D) | Approx. 337 x 390 x 386 mm (13.27 x 15.35 x 15.2 in.) |
| (excluding protrusions) | |
| Weight | Approx. 17 kg (37.48 lb.) (body only) |
| Supported Controllers | Hardware: RC-IP100, RC-IP1000 |
| Software: Remote Camera Control Application, Search Tool | |
| Survival Wind Speed | 25 m/sec.: Normal operation |
| 35 m/sec.: Operation possible | |
| 60 m/sec.: Non destruction | |
| Wiper | Yes |
| Dust-resistant/Waterproof | IP55 |
View more about CANON CR-X500 on main site